Rent Pressure Washer Lowes (2024)

FAQs

How much does a pressure washer use per hour? ›

“Most standard pressure washers will use between 2 to 4 GPM.” That comes a total of 120 to 240 Gallons Per Hour. To bring that into perspective, a standard bathtub holds about 80 gallons of water.

The only difference is heat. A pressure washer uses high pressure to output water powerfully in order to wash away grime, dirt and even paint. A power washer does the same thing, but uses heated water.

What PSI Is Needed To Clean Driveway? Using a pressure washer with a PSI of 3000 or more will help clean your driveway swiftly and effectively. Pressure washers with lesser PSIs can also do the job, but they will take longer to finish the project for the same results.

Choosing a Pressure Washer

Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.

Gas pressure washers can typically run for about 30 minutes before they need a break. Electric models can usually go for an hour or more. If you're using a hot water pressure washer, you'll need to give it breaks more frequently – about every 15 minutes.

How much does it cost to run a pressure washer for 1 hour? This all depends on the wattage of the pressure washer itself and the energy price cap. At the time of writing, a 1500W pressure washer would use 1.5kWh, which will set you back 37p an hour. If you choose a more powerful pressure washer, it'll cost you more.

What is soft washing? Soft washing is a safe alternative to pressure washing. It uses water-based, biodegradable solutions that suspend dirt and grime. This process dissolves cobwebs and kills mold, bacteria, and algae while sanitizing the surface.

The Dangers of DIY Pressure Washing

These machines can expel water at 3,000 PSI. It's powerful enough to punch holes into your vinyl sidings and windows, damage the wood surfaces of your deck, or erode the cement in your driveway. If not handled correctly, DIY pressure washers can also cause serious injury.

Yes, you can clean concrete using a 2,000 PSI pressure washer. With 2,000 PSI of power, you will have to spend more time cleaning the concrete for a complete clean, but you can still get optimal results.

How many PSI to clean concrete? ›

Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.

Choose Your Pressure Washer's Cleaning Power

A pressure washer rated with a higher PSI and GPM cleans better and faster but often costs more than lower-rated units. Perfect for smaller jobs around the home like cleaning outdoor furniture, grills and vehicles.

Using a Pressure Washer to Clean Vinyl Siding

Pressure washers are easy to operate and are perfectly safe for cleaning your siding, contrary to what you may have heard before. The trick is to use lower water pressure so the water doesn't get behind your siding or damage the surface.

When comparing power washing vs. pressure washing, the most significant difference between the two is heat. A power washing machine's jet wash uses heated water, while a pressure washer uses cold water. Both techniques use water pressure to remove dirt, grime, algae, etc., from outdoor surfaces.

Pressure washers are a great tool for cleaning a variety of outdoor surfaces, including patios, decks, and driveways. However, with great power comes great energy consumption.

A typical 13 HP Honda portable power washing unit uses about a gallon an hour; your cost estimate per hour would be around $4.25 to account for inflation over time. The larger 20 HP power washers would use just slightly more fuel and your estimate should be about $5.00 per hour for that size machine.

While it may seem like pressure washers use a lot of water, they use very little compared to the garden hose. On average, they use between 50-80% less than a typical garden hose, and that's all thanks to its high-pressure system.

On a normal sized house roughly 2,000 square feet, with a five gpm pressure washer, it normally takes about an hour and a half to complete the wash. That would mean to clean a normal size house, would use about four hundred and fifty gallons of water.